Engineering Excellence in Pumping Solutions

/*

INM-D Series

Twin Head Mounted In-Line Pumps

Description :

  • INM-D series twin head mounted, in-line type centrifugal pumps.
  • Formed by jining two standard INM series pumps with collector parts.
  • Special design composed of a common collector and integrated check valves at each pump exit that provides forn independent operation.
  • In case of failure of the pump the second pump goes into operation, so the process does not come to a halt.
  • Single suction, closed type impeller is equipped with rear rings to balance thrust and is dynamically balanced.
  • Maintenance-Repair processes are very easy due to the back pull-out design.
  • Standart asynchronous motors are used to set pump in motion.
  • The pump shaft is coupled with the motor shaft by means of a special clamp. This coupling makes it easy to dismantle the pump without removing the motor.

  • HVAC systems
  • Industrial plants
  • Swimming pools Horizontal High Pressure Multistage Centrifugal Pumps
  • Geothermal plants
INM-D Series?v=2.5
INM-D Serisi
INM-D Serisi
INM-D Serisi
INM-D Serisi
INM-D Serisi

Technical Specifications :

 

Flow Rate (m³/h) : 2 ... 280
Head (m)  : 2 ... 16
Operating Pressure (bar) : 10
Operating Temperature (°C) : -25 ... 120
Motor Speed ​​Range (d/d) : 900 ... 3600
Suction Flange : DN 40 ... DN 150 (DIN 2533)
Discharge Flange : DN 40 ... DN 150 (DIN 2533)

Technical Documents

Find A Suitable Pump For You

Find The Nearest Sale Point To You

INM-D Series

Twin Head Mounted In-Line Pumps
INM-D Serisi
INM-D Serisi
INM-D Serisi
INM-D Serisi
INM-D Serisi

Specifications :

 

Flow Rate (m³/h) : 2 ... 280
Head (m)  : 2 ... 16
Operating Pressure (bar) : 10
Operating Temperature (°C) : -25 ... 120
Motor Speed ​​Range (d/d) : 900 ... 3600
Suction Flange : DN 40 ... DN 150 (DIN 2533)
Discharge Flange : DN 40 ... DN 150 (DIN 2533)

Description :

  • INM-D series twin head mounted, in-line type centrifugal pumps.
  • Formed by jining two standard INM series pumps with collector parts.
  • Special design composed of a common collector and integrated check valves at each pump exit that provides forn independent operation.
  • In case of failure of the pump the second pump goes into operation, so the process does not come to a halt.
  • Single suction, closed type impeller is equipped with rear rings to balance thrust and is dynamically balanced.
  • Maintenance-Repair processes are very easy due to the back pull-out design.
  • Standart asynchronous motors are used to set pump in motion.
  • The pump shaft is coupled with the motor shaft by means of a special clamp. This coupling makes it easy to dismantle the pump without removing the motor.

  • HVAC systems
  • Industrial plants
  • Swimming pools Horizontal High Pressure Multistage Centrifugal Pumps
  • Geothermal plants

Technical Documents

Find A Suitable Pump For You

Find The Nearest Sale Point To You

Our Company Mas-Daf Makina Sanayi A.Ş located currently in İstanbul, Tuzla, Aydınlı Mah. Birlik Osb 1. Cad. No:17 was founded in 1977

Mas-Daf Makina Sanayi A.Ş. which operates its activities from its head office along with its branches located in Turkey has no any other subsidiaries, affiliates, branches, associations, liaison offices or partnerships in any other country but Turkey.