Engineering Excellence in Pumping Solutions

/*

KYP Series

Thermal Oil Pumps

Description :

  • Single stage, end suction centrifugal pumps.
  • Main pump dimensions are compatible with DIN 24256 (ISO 2858).
  • Single entry, closed type impeller is used.
  • Radial vanes are used behind the impellers to lower the pressure and to balance the thrust (axial force).
  • The pump and the motor are connected by means of a flexible coupling on a common base plate.
  • Maintenance of the pump is very easy. The shaft and other rotating parts can be removed without dismantling the suction and the discharge system.
  • Since the pump uses many standart parts, spare parts are readily avaible.
  • These pumps are designed so that there is no need for external coolimg. Due to natural convection the pump temperature decreases towards the roller bearing. 

  • Transfer of heat transfer fluid.
  • Chemical installalitons and refineries.
  • Paper and sugar industry
  • Food and pharmaceutical industries
  • Leather industry
  • Plastic and synthetic fiber industries.
  • Vulcanizing and heaing industry
  • Textile industry.
KYP Series?v=2.5
KYP Serisi
KYP Serisi
KYP Serisi
KYP Serisi
KYP Serisi

Technical Specifications :

Flow Rate (m³/h) : 10 ... 400
Head (m) : 5 ... 110
Operating Pressure (bar) : 16
Operating Temperature (°C) : 100 ... 350
Motor Speed ​​Range (d/d) : 1500...3000
Suction Flange : DN 40 ... DN 125
Discharge Flange : DN 32 ... DN 100

Technical Documents

Find A Suitable Pump For You

Find The Nearest Sale Point To You

KYP Series

Thermal Oil Pumps
KYP Serisi
KYP Serisi
KYP Serisi
KYP Serisi
KYP Serisi

Specifications :

Flow Rate (m³/h) : 10 ... 400
Head (m) : 5 ... 110
Operating Pressure (bar) : 16
Operating Temperature (°C) : 100 ... 350
Motor Speed ​​Range (d/d) : 1500...3000
Suction Flange : DN 40 ... DN 125
Discharge Flange : DN 32 ... DN 100

Description :

  • Single stage, end suction centrifugal pumps.
  • Main pump dimensions are compatible with DIN 24256 (ISO 2858).
  • Single entry, closed type impeller is used.
  • Radial vanes are used behind the impellers to lower the pressure and to balance the thrust (axial force).
  • The pump and the motor are connected by means of a flexible coupling on a common base plate.
  • Maintenance of the pump is very easy. The shaft and other rotating parts can be removed without dismantling the suction and the discharge system.
  • Since the pump uses many standart parts, spare parts are readily avaible.
  • These pumps are designed so that there is no need for external coolimg. Due to natural convection the pump temperature decreases towards the roller bearing. 

  • Transfer of heat transfer fluid.
  • Chemical installalitons and refineries.
  • Paper and sugar industry
  • Food and pharmaceutical industries
  • Leather industry
  • Plastic and synthetic fiber industries.
  • Vulcanizing and heaing industry
  • Textile industry.

Technical Documents

Find A Suitable Pump For You

Find The Nearest Sale Point To You

Our Company Mas-Daf Makina Sanayi A.Ş located currently in İstanbul, Tuzla, Aydınlı Mah. Birlik Osb 1. Cad. No:17 was founded in 1977

Mas-Daf Makina Sanayi A.Ş. which operates its activities from its head office along with its branches located in Turkey has no any other subsidiaries, affiliates, branches, associations, liaison offices or partnerships in any other country but Turkey.