Engineering Excellence in Pumping Solutions

/*

YKF Series

Gear Pumps

Description :

  • "Gear-within a gear" principle has only two moving parts. It is the secret of dependable, efficient operation of all positive displacement gear pumps.
  • Liquids to be pumped by the gear pump must be clean rather than liquids to be pump by other pump types. Thus, performance of the gear pump is provided to rise to the highest point.
  • Positive displacement of liquid is achieved by filling the gap between the rotor and teeth of idler gear.
  • Sealing is provided by soft packing or mechanical seals.
  • Crescent-shaped piece on the pump cover acts as a seal (gasket) between the suction and discharge mouth by splitting the liquid.

  • Fuel oil service tanks, gas oil, diesel-fuel tanks
  • On a small scale hot oil circulations
  • Half viscose liquids of industry are on pumping process
  • Medicine, chemistry and detergent industry
  • Food industry

Gear Pump By-Pass Operation

By-pass means the protection of the motor against the excessive pressure due to any blockage that might ocur in the pipeline for ant reason. This pump with positive sweeping may be overloaded because of the closing in the pressure line during operation. As a result, some parts of the pump might break. By-pass can be installed on the pressure line as well as directly on the pump. The assembly form does not change the operation principle.

Technical Specifications :

Flow Rate (m³/h)  : 1 ... 200
Manometric Height Range (m) : 30 ... 90
Operating Temperature (°C) : 0 ... 200
Motor Speed ​​Range (d/d) : 1 ... 1500
Operating Pressure (bar) : 0 ... 10
Viscosity (SSU) : 100 ... 250000

Technical Documents

Find A Suitable Pump For You

Find The Nearest Sale Point To You

YKF Series

Gear Pumps

Specifications :

Flow Rate (m³/h)  : 1 ... 200
Manometric Height Range (m) : 30 ... 90
Operating Temperature (°C) : 0 ... 200
Motor Speed ​​Range (d/d) : 1 ... 1500
Operating Pressure (bar) : 0 ... 10
Viscosity (SSU) : 100 ... 250000

Description :

  • "Gear-within a gear" principle has only two moving parts. It is the secret of dependable, efficient operation of all positive displacement gear pumps.
  • Liquids to be pumped by the gear pump must be clean rather than liquids to be pump by other pump types. Thus, performance of the gear pump is provided to rise to the highest point.
  • Positive displacement of liquid is achieved by filling the gap between the rotor and teeth of idler gear.
  • Sealing is provided by soft packing or mechanical seals.
  • Crescent-shaped piece on the pump cover acts as a seal (gasket) between the suction and discharge mouth by splitting the liquid.

  • Fuel oil service tanks, gas oil, diesel-fuel tanks
  • On a small scale hot oil circulations
  • Half viscose liquids of industry are on pumping process
  • Medicine, chemistry and detergent industry
  • Food industry

Gear Pump By-Pass Operation

By-pass means the protection of the motor against the excessive pressure due to any blockage that might ocur in the pipeline for ant reason. This pump with positive sweeping may be overloaded because of the closing in the pressure line during operation. As a result, some parts of the pump might break. By-pass can be installed on the pressure line as well as directly on the pump. The assembly form does not change the operation principle.

Technical Documents

Find A Suitable Pump For You

Find The Nearest Sale Point To You

Our Company Mas-Daf Makina Sanayi A.Ş located currently in İstanbul, Tuzla, Aydınlı Mah. Birlik Osb 1. Cad. No:17 was founded in 1977

Mas-Daf Makina Sanayi A.Ş. which operates its activities from its head office along with its branches located in Turkey has no any other subsidiaries, affiliates, branches, associations, liaison offices or partnerships in any other country but Turkey.