Engineering Excellence in Pumping Solutions

/*

ENM SERIES

FI-FI System Pumps

Description :

  • These are horizontal type, single stage, single entry, horizontal volute type pumps with a horizontal suction port on the axis and the discharge port on the top, and an enclosed impeller.
  • Since the volute is symmetrical it can be assembled to be used in either direction. Thanks to this feature, it can also be used with motors which rotate counterclockwise.
  • ENM pump impellers are of double incline type. The impellers are dynamically balanced to the base. The axial thrust is compensated by rear back wear rings and balance holes.
  • The pumps are equipped with a rigid shaft that can operate under different loads.
  • The sliding bearing within the suction body is lubricated with water.
  • The construction is compact thanks to the short distance between the bend-resistant shaft and bearing and the volute. This feature allows it to be used in space-restricted (eg.Marine Fire Brigade)
  • In standart configurations, two roller bearings are used. A console bearing is optional.

  • Fi-Fi  systems for fire boats
  • Fresh water and sea water pumping in ships.
  • Large fire extinguishing systems
  • Industrial and social installations.
ENM SERIES?v=2.5

Technical Specifications :

 

Capacity Range (m³/h)  : 400 ... 4000
Head (m)  : 60 ... 150
Operating Pressure (bar) : 16 
Operating Temperature (°C) : -20 ... 110
Motor Speed ​​Range (d/d) : 1000...1800 
Suction Flange : DN 300 ... DN 500
Compression Flange : DN 250 ... DN 400

  

 

Technical Documents

Find A Suitable Pump For You

Find The Nearest Sale Point To You

ENM SERIES

FI-FI System Pumps

Specifications :

 

Capacity Range (m³/h)  : 400 ... 4000
Head (m)  : 60 ... 150
Operating Pressure (bar) : 16 
Operating Temperature (°C) : -20 ... 110
Motor Speed ​​Range (d/d) : 1000...1800 
Suction Flange : DN 300 ... DN 500
Compression Flange : DN 250 ... DN 400

  

 

Description :

  • These are horizontal type, single stage, single entry, horizontal volute type pumps with a horizontal suction port on the axis and the discharge port on the top, and an enclosed impeller.
  • Since the volute is symmetrical it can be assembled to be used in either direction. Thanks to this feature, it can also be used with motors which rotate counterclockwise.
  • ENM pump impellers are of double incline type. The impellers are dynamically balanced to the base. The axial thrust is compensated by rear back wear rings and balance holes.
  • The pumps are equipped with a rigid shaft that can operate under different loads.
  • The sliding bearing within the suction body is lubricated with water.
  • The construction is compact thanks to the short distance between the bend-resistant shaft and bearing and the volute. This feature allows it to be used in space-restricted (eg.Marine Fire Brigade)
  • In standart configurations, two roller bearings are used. A console bearing is optional.

  • Fi-Fi  systems for fire boats
  • Fresh water and sea water pumping in ships.
  • Large fire extinguishing systems
  • Industrial and social installations.

Technical Documents

Find A Suitable Pump For You

Find The Nearest Sale Point To You

Our Company Mas-Daf Makina Sanayi A.Ş located currently in İstanbul, Tuzla, Aydınlı Mah. Birlik Osb 1. Cad. No:17 was founded in 1977

Mas-Daf Makina Sanayi A.Ş. which operates its activities from its head office along with its branches located in Turkey has no any other subsidiaries, affiliates, branches, associations, liaison offices or partnerships in any other country but Turkey.