Engineering Excellence in Pumping Solutions

/*

UKM-S Series

Self-Priming Centrifugal Pumps

Description :

  • UKM-S series pumps are self-priming centrifugal pumps with upper suction flap.
  • Since they are self-priming pumps it is only necessary to place the end of the suction pipe  into the liquid to be pumped.
  • A flexible coupling or a V-belt pulley can be used to startup the pump directly in the case of a Diesel or an electric motor.
  • UKM-S Series consist of 6  different types; 2", 3", 4", 6", 8", 10".
  • The impellers are two-vane, open type and can pump up to 76 mm (3") solid particles depending on the size of the pump.
  • The suction cover can be removed from the front, making it easy to reach the impeller. Any obstruction can be removed without touching the suction and discharge parts.
  • The flap connected to the suction flange has been specially designed so that is possible to clean or to remove and install the flap without touching the suction system.
  • The rollerbearing ( bearing bushing) is supported by the pump body. There can be no problem in speed up.
  • UKM series pumps are very easy to use because they are of self-priming type. Once the suction pipe is placed into the liquid the pump starts to function in one minute maximum depending on the suction height.

  • Pumping of residental and industrial crude sewage liquids.
  • Sewage treatment installations
  • Pumping of liquids containing sludge and solid particles
  • Pumping of waste water from factories
  • For use in all kinds of drainage and discharge systems.
  • High capacity range centrifugal rotodynamic pump, having up to 45 m manometric height and 800 m3 per hour hydraulic working area.
  • Quick self-priming without foot valve.
  • Electric motor & diesel engine application, IP 55/56 Protection Class, High Efficiency IE2 or IE3 (Optional) Electrical Motors
  • The impellers are designed such that they have 2 blades with wide cross-sectional areas. It’s open impeller form allows the passage of up to 76 mm (3”) diameter solid particles.
  • Due to the special designed impeller, the pump make self-priming and pumps water fast. Thus, the hydraulic efficiency is increased.
  • Replaceable wear plate for long operating life and efficiency.
  • Full access to the impeller and mechanical seal for inspection and maintenance without removing the pipework or the rotating assembly.
  • Dual protection of bearings through double oil bath, with intermediate discharge to atmosphere, to isolate the oil in the bearing housing from the oil in the mechanical seal. Leakages can be monitored through the intermediate chamber.
  • The flap connected to the suction flange has been special designed so that is possible to clean or to remove and install the flap without touching the suction system.
UKM-S  Series?v=2.5

Technical Specifications :

 

Capacity (m³/h) : 10…800
Total Head (m) : 4…40
Operation Pressure (bar) : 6
Operation Temperature (°C) : 60
Motor Speed Range (d/d) : 650…2900
Suction Flange : DN 50... DN 250 (2"...10")
Discharge  Flange : DN 50... DN 250 (2"...10")

  

Technical Documents

Find A Suitable Pump For You

Find The Nearest Sale Point To You

UKM-S Series

Self-Priming Centrifugal Pumps

Specifications :

 

Capacity (m³/h) : 10…800
Total Head (m) : 4…40
Operation Pressure (bar) : 6
Operation Temperature (°C) : 60
Motor Speed Range (d/d) : 650…2900
Suction Flange : DN 50... DN 250 (2"...10")
Discharge  Flange : DN 50... DN 250 (2"...10")

  

Description :

  • UKM-S series pumps are self-priming centrifugal pumps with upper suction flap.
  • Since they are self-priming pumps it is only necessary to place the end of the suction pipe  into the liquid to be pumped.
  • A flexible coupling or a V-belt pulley can be used to startup the pump directly in the case of a Diesel or an electric motor.
  • UKM-S Series consist of 6  different types; 2", 3", 4", 6", 8", 10".
  • The impellers are two-vane, open type and can pump up to 76 mm (3") solid particles depending on the size of the pump.
  • The suction cover can be removed from the front, making it easy to reach the impeller. Any obstruction can be removed without touching the suction and discharge parts.
  • The flap connected to the suction flange has been specially designed so that is possible to clean or to remove and install the flap without touching the suction system.
  • The rollerbearing ( bearing bushing) is supported by the pump body. There can be no problem in speed up.
  • UKM series pumps are very easy to use because they are of self-priming type. Once the suction pipe is placed into the liquid the pump starts to function in one minute maximum depending on the suction height.

  • Pumping of residental and industrial crude sewage liquids.
  • Sewage treatment installations
  • Pumping of liquids containing sludge and solid particles
  • Pumping of waste water from factories
  • For use in all kinds of drainage and discharge systems.
  • High capacity range centrifugal rotodynamic pump, having up to 45 m manometric height and 800 m3 per hour hydraulic working area.
  • Quick self-priming without foot valve.
  • Electric motor & diesel engine application, IP 55/56 Protection Class, High Efficiency IE2 or IE3 (Optional) Electrical Motors
  • The impellers are designed such that they have 2 blades with wide cross-sectional areas. It’s open impeller form allows the passage of up to 76 mm (3”) diameter solid particles.
  • Due to the special designed impeller, the pump make self-priming and pumps water fast. Thus, the hydraulic efficiency is increased.
  • Replaceable wear plate for long operating life and efficiency.
  • Full access to the impeller and mechanical seal for inspection and maintenance without removing the pipework or the rotating assembly.
  • Dual protection of bearings through double oil bath, with intermediate discharge to atmosphere, to isolate the oil in the bearing housing from the oil in the mechanical seal. Leakages can be monitored through the intermediate chamber.
  • The flap connected to the suction flange has been special designed so that is possible to clean or to remove and install the flap without touching the suction system.

Technical Documents

Find A Suitable Pump For You

Find The Nearest Sale Point To You

Our Company Mas-Daf Makina Sanayi A.Ş located currently in İstanbul, Tuzla, Aydınlı Mah. Birlik Osb 1. Cad. No:17 was founded in 1977

Mas-Daf Makina Sanayi A.Ş. which operates its activities from its head office along with its branches located in Turkey has no any other subsidiaries, affiliates, branches, associations, liaison offices or partnerships in any other country but Turkey.