Engineering Excellence in Pumping Solutions

/*

INM/INL Series

Inline Centrifugal Pumps

Description :

  • Single-stage inline type centrifugal pumps are produced with standart motors and mechanical seal.
  • Pump flanges are designed in PN 16 pressure category compatible with DIN 2533. The suction and discharge flanges are identical and are on the same axis. Both flanges are equipped with pressure gage tapings.
  • Single entry, closed impeller is equipped with rear rings to balance thrust and is dynamically balanced.
  • Motor is connected to the pump by an adaptor and a flange.
  • Motor shaft is joined to pump shaft by a special clamp. In the case of motors with power over a certain value the pump and the motor shafts are joined by seperate rigid coupling.
  • Pump shaft,motor and other parts can be removed without replacing the suction and discharge flanges and the pump volute. Thus, assembly and maintenance producers are carried out very easily.
  • Standart asynchronous motor is used to activate pump.
  • In NMM pumps shaft leakage is prevented by a mechanical seal. All radial and thrust forces are supported by the motor bearing.

 

• Water supply and pumping centers.

• İrrigation, sprinkling, drainage processes.

• Tank systems

• Hot - cold water circulation and cooling system

• Pumping of condensed water

• Swimming pool water circulation.

• Industrial and domestic fluid pumping processes

• Marine applications.

INM/INL Series?v=2.5
INM/INL Serisi
INM/INL Serisi
INM/INL Serisi
INM/INL Serisi
INM/INL Serisi

Technical Specifications :

Flow Rate (m³/h) : 2 ... 850
Head (m) : 2 ... 100
Operating Pressure (bar) : 10
Operating Temperature (°C) : -25...120
Motor Speed ​​Range (d/d) : 900 ... 3600
Suction Flange : DN40 ... DN200 (PN16) (DIN 2535)
Discharge Flange : DN 40 ... DN200 (PN16) (DIN 2535)

Technical Documents

Find A Suitable Pump For You

Find The Nearest Sale Point To You

INM/INL Series

Inline Centrifugal Pumps
INM/INL Serisi
INM/INL Serisi
INM/INL Serisi
INM/INL Serisi
INM/INL Serisi

Specifications :

Flow Rate (m³/h) : 2 ... 850
Head (m) : 2 ... 100
Operating Pressure (bar) : 10
Operating Temperature (°C) : -25...120
Motor Speed ​​Range (d/d) : 900 ... 3600
Suction Flange : DN40 ... DN200 (PN16) (DIN 2535)
Discharge Flange : DN 40 ... DN200 (PN16) (DIN 2535)

Description :

  • Single-stage inline type centrifugal pumps are produced with standart motors and mechanical seal.
  • Pump flanges are designed in PN 16 pressure category compatible with DIN 2533. The suction and discharge flanges are identical and are on the same axis. Both flanges are equipped with pressure gage tapings.
  • Single entry, closed impeller is equipped with rear rings to balance thrust and is dynamically balanced.
  • Motor is connected to the pump by an adaptor and a flange.
  • Motor shaft is joined to pump shaft by a special clamp. In the case of motors with power over a certain value the pump and the motor shafts are joined by seperate rigid coupling.
  • Pump shaft,motor and other parts can be removed without replacing the suction and discharge flanges and the pump volute. Thus, assembly and maintenance producers are carried out very easily.
  • Standart asynchronous motor is used to activate pump.
  • In NMM pumps shaft leakage is prevented by a mechanical seal. All radial and thrust forces are supported by the motor bearing.

 

• Water supply and pumping centers.

• İrrigation, sprinkling, drainage processes.

• Tank systems

• Hot - cold water circulation and cooling system

• Pumping of condensed water

• Swimming pool water circulation.

• Industrial and domestic fluid pumping processes

• Marine applications.

Technical Documents

Find A Suitable Pump For You

Find The Nearest Sale Point To You

Our Company Mas-Daf Makina Sanayi A.Ş located currently in İstanbul, Tuzla, Aydınlı Mah. Birlik Osb 1. Cad. No:17 was founded in 1977

Mas-Daf Makina Sanayi A.Ş. which operates its activities from its head office along with its branches located in Turkey has no any other subsidiaries, affiliates, branches, associations, liaison offices or partnerships in any other country but Turkey.